Biounavailable Calcium: A High Hair Calcium the Body Is Not Holding in Solution

Home/Store/Blog/Biounavailable Calcium: A High Hair Calcium the Body Is Not Holding in Solution

A high reading that reads as a deficiency

Calcium above 100 mg% beside magnesium above 9, with the sodium and potassium that should hold them in solution reading low

The pattern workbook defines biounavailable calcium by two thresholds and one mechanism: sodium and potassium are the solvent minerals, and as they fall, calcium and magnesium precipitate into the tissues, including the hair. Analytical Research Labs states the general rule the pattern belongs to.

  • Calcium above 100 mg%
  • Magnesium above 9 mg%
  • Low sodium and potassium

The definition

The pattern workbook Eileen reads charts against defines the pattern as calcium above 100 mg% and magnesium above 9 mg%. Its mechanism: calcium and magnesium are not kept in a soluble form in the blood to a great enough extent. Sodium and potassium are the body's solvent minerals and are needed to keep calcium and magnesium in solution, so as the sodium and potassium levels decrease, some calcium and magnesium cannot be kept in an ionized or soluble form and begin to precipitate out of the blood and accumulate in the tissues, including the hair. The workbook records slow oxidation with weakened adrenal and thyroid activity as a cause of the pattern.

Analytical Research Labs (ARL) places the ideal calcium at 40 mg% and magnesium at 6 mg%. Trace Elements, Inc. (TEI) has used 60 mg% for calcium since 2008 (42 mg% in its 1985 to 1993 reference) and 6 mg% for magnesium. The workbook's calcium threshold of 100 is 2.5 times the ARL ideal and 1.67 times the TEI ideal; its magnesium threshold of 9 is 1.5 times the shared ideal. ARL's document set also carries a lower pair for bio-unavailable calcium and magnesium, calcium above 50 mg% with magnesium above about 9.

The rule the pattern belongs to

ARL states the general rule: a nutrient is bio-unavailable when it is present in the body but cannot be used, and the cause is a deficiency of the other nutrients needed to allow it to be used. ARL adds that any higher than normal mineral level on a hair analysis may represent an impaired ability to utilize that mineral. ARL's Glossary lists bio-unavailability among the six components that sum to a hair reading, and records that bio-unavailable minerals are generally elevated in the hair unless locked in tissues other than hair, in which case the level may read very low.

ARL's worked example for calcium is the elderly, who often lack calcium in their bones but carry calcium deposits in their arteries, joints, kidneys and other tissues. ARL records that a high hair calcium in a slow oxidizer therefore produces signs of both high and low calcium at the same time. Trace Elements, Inc. (Watts) states that low levels of a mineral found in the hair do indicate a deficiency, but a normal level does not necessarily rule out a deficiency.

Sodium and potassium as the solvents

ARL's bone-density document gives the slow-oxidation mechanism in full. Sodium and potassium are the solvent elements that keep calcium ionized in the blood; when they fall, calcium leaves the blood and precipitates into tissues, blood calcium drops, and bone calcium is withdrawn to compensate. ARL adds that an underactive thyroid often produces an overactive parathyroid, which mobilizes bone calcium, and TEI's gland table reads increased parathyroid activity from a calcium/phosphorus ratio above 3, a calcium/magnesium ratio above 13 and a calcium/potassium ratio above 4.2.

The ideals for sodium and potassium are 24 to 25 mg% and 10 mg%. ARL defines slow oxidation as a Ca/K above 4 with an Na/Mg below 4.17, and the workbook names slow oxidation with weakened adrenal and thyroid activity as the cause of this pattern. With calcium at 100 and potassium at 10, the Ca/K is 10, ARL's threshold for an adrenal indicator; with potassium at 5, it is 20. With magnesium at 9 and sodium at 25, the Na/Mg is 2.78, in ARL's mild sluggish adrenal band of 2 to 4.17.

The calcium/magnesium ratio itself can read normal in this pattern. Calcium 100 over magnesium 9 is 11.1, above ARL's acceptable 4.5 to 8.5 and just above TEI's 3 to 11; calcium 120 over magnesium 18 is 6.67, the ARL ideal. Two elevated levels can produce an ideal ratio, which is why the two levels are read before the ratio.

The other readings beside it

ARL records that calcium above about 80 mg% is one of its indicators that hidden copper toxicity must be considered, with potassium under 4 mg%, and ARL's copper document records that the calcium level is an indicator of the amount of copper being stored. TEI records that copper increases the tissue retention of calcium. A calcium reading above 100 is therefore read with the copper line, the zinc/copper ratio against 8 to 1, and the potassium line.

ARL records that lead replaces calcium and that lead and cadmium displace calcium and distort the Ca/Mg ratio, so the lead and cadmium lines are read with the calcium. ARL's calcium shell threshold is 200 mg%, covered in the calcium shell article; the workbook's 100 mg% line is 40 mg% above the TEI ideal and 100 mg% below the shell line.

Both laboratories report in mg% on unwashed hair, and TEI specifies a sample no longer than 1.5 inches cut at the scalp. TEI's 22-inch strand study found calcium at 27 mg% at the scalp and over 200 mg% at the far end, so an over-long sample can report a high calcium that is accumulated exposure rather than the current pattern.

The trends the workbook attaches

The workbook's association list publishes in trend language, each trend belonging to the pattern: an irritability and anxiety trend, a muscle tightness and cramping trend, a bone-density trend, a fatigue and depression trend, a weakness trend, an arthritis and tendon trend, a high blood pressure trend, an arterial hardening trend and a memory trend.

Reading Threshold or ideal Source
Calcium, pattern threshold above 100 mg% Pattern workbook
Magnesium, pattern threshold above 9 mg% Pattern workbook
Calcium ideal 40 mg% (ARL) to 60 mg% (TEI, 2008 on) ARL, TEI
Magnesium ideal 6 mg% ARL and TEI
Calcium, hidden copper indicator over about 80 mg% ARL
Calcium shell above 200 mg% ARL
Sodium and potassium ideals 24 to 25 mg%; 10 mg% TEI, ARL

What this is, and is not

A hair tissue mineral analysis is a screening test and is not diagnostic. It reports tissue mineral levels in milligrams percent (mg%) and the ratios between them; it does not establish a cause, and it does not measure what is circulating in blood today. Each reading reflects roughly 2 to 3 months of hair growth, and a retest 3 to 5 months later shows the direction of change. Where the laboratory literature describes a trend, that trend belongs to the mineral pattern rather than to any person reading about it.

Chart reading order for this pattern

The calcium line against 100 and the magnesium line against 9 come first, then the sodium line against 24 to 25 and the potassium line against 10, because the pattern is two levels high while the two solvent minerals read low.

Next: Ca/K against 4 to 4.2 and Na/Mg against 4 to 4.17 for the oxidation rate; the calcium line against 80 and 200; the copper line with Zn/Cu against 8; the lead and cadmium lines; and the sample length noted on the request form.

Questions people ask

What is biounavailable calcium on a hair test?

The pattern workbook defines it as calcium above 100 mg% with magnesium above 9 mg%: calcium that is present but not held in solution, because the solvent minerals sodium and potassium have fallen.

Why would high calcium mean a calcium deficiency?

ARL states that any higher than normal hair mineral level may represent an impaired ability to use that mineral. Its example is calcium missing from bone while deposited in arteries, joints and kidneys.

Can the Ca/Mg ratio look normal in this pattern?

Yes. Calcium 120 over magnesium 18 gives 6.67, the ARL ideal, while both levels are elevated. The levels are read before the ratio.

How is this different from a calcium shell?

ARL places the calcium shell at calcium above 200 mg%. The workbook’s biounavailable calcium line is 100 mg%, with magnesium above 9 beside it.

Explore More

Calcium shell on a hair analysis The calcium/magnesium ratio Two opposite bone-density trends on a hair test

Two levels high, two levels low

A full hair tissue mineral analysis reports calcium and magnesium beside sodium and potassium, with the Ca/K, Na/Mg and Ca/Mg ratios, so a high calcium can be read as retained, deposited or in use.

Hair analysis kitMore articles

Published 2026-11-18 · Updated 2026-11-18

By Eileen Durfee — Practitioner, NBS (Nutritional Balancing Science), NASM-CPT; wellness educator, inventor and author.

These statements have not been evaluated by the Food and Drug Administration. This product is not intended to diagnose, treat, cure or prevent any disease. Hair tissue mineral analysis is a screening test. This article is for educational purposes only. Wellness Shopping Online is operated by Nuco Enterprise Solutions LLC.

  • Search Products
  • My Account
  • Track Orders
  • Shopping Bag
Powered by Lightspeed
Display prices in:USD
Skip to main content
Wellness Shopping Online
Home
Collections
Others
International
About Us
Contact Us
Blog
Our Location
(888) 932-2526
ENAR
Menu

© 2026 Wellness Shopping Online, All rights reserved.

Language:
ENAR
Terms & ConditionsPrivacy PolicyShipping & Payment InfoReturn Policy About Wellness Shopping OnlineReport Abuse
Powered by Lightspeed